Sony DVS-9000 System User Manual page 425

Function assignment buttons
Buttons used when the three-dimensional transform operation
mode is enabled
LOCAL: Enable operations in the DME local coordinate space.
GLB (global): Enable operations in the DME global coordinate space.
The [LOCAL] and [GLB] buttons can be selected at the same time.
SRC (source): Enable operations in the DME source coordinate space.
TRGT (target): Enable operations in the DME target coordinate space.
The [SRC] and [TRGT] buttons cannot be selected at the same time. When
these buttons are held down, trackball and Z-ring operation is switched to
a finer control. (fine mode)
AXIS LOC (location): When this button is lit, the trackball moves the
rotational axis of the image in the x-axis and y-axis directions, and the Z-
ring moves the axis in the z-axis direction.
ASP PERS (aspect/perspective): When the [SRC] button is lit, pressing this
button enables the trackball to control the x-axis and y-axis directions
independently, and the Z-ring controls the x-axis and y-axis directions
together, to vary the aspect ratio. When the [SHIFT] button is held down
and this button is pressed, the trackball controls the skew of the image in
the x-axis and y-axis directions.
When the [TRGT] button is lit, pressing this button enables the trackball
Region selection buttons (DME1 to 4)
M/E1 M/E2 M/E3 P/P USER
DME1 DME2 DME3 DME4
RUN
DME5 DME6 DME7 DME8
CTRL
LOCAL GLB
SRC TRGT
MENU K1 K2
K3 K4
CB1 CB2
AXIS ASP LOC LOC ROT
LOC PERS SIZE XYZ POS
MAIN SUB ASP LOC RSZR
CLR
SHIFT WORK X Y Z
BUFR
Operating buttons
Trackball
DEV
RSZR
CTRL
CTR
Three-Dimensional Transformation Operations
Z-ring
425