Sony DVS-9000 System User Manual page 887

block is installed and whose assignment is determined by the M/E Assign
menu.
When the independent key transition control block (simple type) is
installed in the extension section
Select the keys to be assigned from the following.
• M/E-1 Key1,2
• M/E-1 Key3,4
• M/E-2 Key1,2
• M/E-2 Key3,4
• M/E-3 Key1,2
• M/E-3 Key3,4
• DSK1,2
• DSK3,4
1)
• Key1,2
1)
• Key3,4
• N/A (no assignment)
1) In this case, depending on the switcher extension interface port, operations always apply to
the following.
Ext Port 1: M/E-1
Ext Port 2: M/E-2
Ext Port 3: M/E-3
For the MKS-8010B, operations also apply to an M/E bank assigned to the interface port in
the Extension Panel menu .
To assign a key to the independent key transition control block (simple type),
use the following procedure. Here the example shown is the case in which keys
3 and 4 ("Key3,4") are assigned to the second row switcher bank of the main
base.
1
In the Panel >Config menu, press [Compact Key Module Assign].
The Compact Key Module Assign menu appears.
The left side of the status area shows data for the main base (physical
layout and switcher bank names and key assignment). The right side shows
the data for the extension section (physical ports and key assignment).
2
Press directly on the display on the left, to select the control block for the
assignment.
Here, press on the intersection of the "2nd Row" column and "Module
Assign" row.
3
In the <Module Assign> group, select the key you want to assign.
In this example, select [Key3,4].
To return the key assignment to the default
In the Compact Key Module Assign menu, press [Default].
This returns all key assignments to their factory default state.
Overall Control Panel Settings (Config Menu)
887