Merlin 3070 Service And Maintenance Manual page 93

TROUBLE ON SEVERAL TELEPHONES
Features
Basic telephones appear to have been programmed when they have not been
Symptom:
programmed.
Possible Cause
A Voice Terminal Module may have
been inserted where the Basic
Telephone Module is now installed.
If so, the programming for the voice
terminals was transferred to the
basic telephones.
B5-8
Recommended Action
Take a voice terminal with its cord attached and a
spare Voice Terminal Module (if available) to the
control unit and follow these steps:
a . Pull out the Basic Telephone Module.
b . Insert the Voice Terminal Module.
c . Plug the voice terminal into the first jack on
the module.
d . Program the voice terminal with its initial
feature assignments. (For a diagram of initial
feature assignments, refer to the
Administration Manual: Models 1030 and 3070
that comes with the Feature Module.)
e . Plug the voice terminal into the remaining
jacks and program the voice terminal with its
initial feature assignments.
f. Remove the Voice Terminal Module.
Reinsert the Basic Telephone Module and
g .
plug in the wiring runs for the basic
telephones.