Merlin 3070 Service And Maintenance Manual page 227

Attaching Cords to Console Body
1.
Check to see that one end of the handset cord is attached to the hand-
set. If it is not attached, plug one end into the handset now.
2. Plug the other end of the handset cord into the jack on the bottom right
corner of the console (see Figure 7).
WARNING: Do not plug the handset cord into the jacks labeled "LINE" or
"OTHER".
Place one end of the modular voice terminal cord (marked D8W on its
3.
jack) under the desk stand's support bar and over the base of the desk
stand (see Figure 7). Plug it into the "LINE" jack on the bottom of the
attendant console.
modular voice terminal cord
jacks for
handset cord
Figure 7.
Attaching Cords to Console Body
desk stand
handset
jack