Merlin 3070 Service And Maintenance Manual page 131

12. Thread one end of the D8W Modular
Cord up through the cord slot in the
wall mount, and plug the cord into the
jack labeled "LINE" on the back of the
voice terminal (see Figure 8).
'OTHER' JACK
'LINE' JACK
CORD
SLOT
Figure 8
Position the back (or bottom) of the
13.
voice terminal so the three terminal
mounting tabs (Figure 9) fit into the
terminal mounting slots.
THREE VOICE TERMINAL
MOUNTING TABS
'OTHER' JACK
34-BUTTON
VOICE
TERMINAL
(BACK VIEW)
Figure 9
14.
Gently slide the voice terminal down-
ward so the three tabs fit into the
smaller part of the corresponding
mounting slots (see Figure 10).
15. Plug the loose end of the handset
cord into the handset.
The installatlon is complete.
16.
TO
'LINE'
JACK
'LINE' JACK
Equipment manufactured by AT&T Technologies in the U.S.A.
Figure 10
Instructions For
203A 34-Button Voice
Terminal Wall Mount
(32006)
CIB 2887
ISSUE 2
©
Copyright 1984 AT&T Technologies
All rights reserved