Merlin 3070 Service And Maintenance Manual page 221

4. Insert a cable tie around each bracket and the second plastic rib in
from each side of the control unit cabinet. Slide the tips of the cable
ties through the loops at the other end. Pull on the tips to tighten the
cable ties, anchoring the cabinet into place (Figure 8).
CAUTION: Once the control unit has been mounted and secured, do not
lean on it or use it as a shelf.
Cable
Ties
Figure 8.
Attaching Cable Ties to the Control Unit
AT&T
Information Systems
Issue 1
Copyright © 1984 AT&T
Printed in the U.S.A.