Merlin 3070 Service And Maintenance Manual page 205

When installed on your communcations system voice terminal (administration/attendant
console), the ZH802A module (Figure 1) increases the capacity of the 34-button deluxe
voice terminal from 10 lines and 30 voice terminals to 30 lines and 90 voice terminals. The
Attendant Intercom Selector Kit includes:
ZH802 Attendant Intercom Selector Module
Front and Back Rails
Adapter Plate
Voice Terminal Power Supply Kit (D-181282).
INSTALLATION
1. Disconnect the modular voice terminal cord from the LINE jack on the 34-button
deluxe voice terminal.
2.
Disconnect handset cord from voice terminal base and set the handset aside.
Turn voice terminal and stand assembly over so that the stand is up.
3.
4.
Slide the stand toward the front of the voice terminal and lift to remove it from the
base.
5. Turn the voice terminal back over so it rests on its base.
6. Remove End Cap by rotating bottom edge of End Cap out and up. (See Figure 2.)
Figure 1