Merlin 3070 Service And Maintenance Manual page 56

Symptom:
Toll call restricted voice terminal is unable to make a local call.
Possible Cause
1 . Toll Prefix/Area Code switch
(switch G on the control unit
Processor Module) may be in
wrong position.
2 . Toll call restriction may be
misadministered.
Recommended Action
1 . Check the setting of the Toll Prefix/Area Code
switch.
Set the switch to Toll Prefix if you must dial 0
or 1 before you dial an area code.
Set the switch to Area Code if you begin with
the area code when you dial a long distance
number.
If you change the position of this switch, reset
the control unit by setting the On/Off switch on
the control unit Power Module to Off then to
On.
2 .
The toll restriction may be misprogrammed.
Refer to the Administration Manual: Models
1030 and 3070 for programming instructions.
TROUBLE ON ONE TELEPHONE
Features
A5-5