Merlin 3070 Service And Maintenance Manual page 119

The two-line adapter is used to connect two line (D4CH) cords to a single network interface
(RJ14C) where two outside telephone lines enter the premises. If you do not know whether
you have two outside telephone lines entering at a single network interface, you can ask
your Local Telephone Exchange Service Company.
INSTALLATION INSTRUCTIONS
Position the adapter so that its plug matches the jack of the network interface. Insert the
1.
adapter plug firmly. It should lock with a slight "click".
TO THE
CONTROL
UNIT
The two jacks of the adapter now provide connecting points for two individual modular
2.
line (D4CH) cords.
REMOVAL INSTRUCTIONS
Hold down the locking tab release and pull the adapter out of the jack of the network
1.
interface.
Equipment manufactured by AT&T Technologies in the U.S.A.
(267C) TWO-LINE ADAPTER (61400)
LOCKING TAB
JACKS
RELEASE
D4CH
LOCAL TELEPHONE
EXCHANGE SERVICE
COMPANY
LOCKING
TAB
NEWORK
PLUG
INTERFACE
(RJ14C)
267C
ADAPTER
CIB 2863
TO LOCAL
TELEPHONE
EXCHANGE
SERVICE
COMPANY
LINES