Merlin 3070 Service And Maintenance Manual page 114

REMOVE TO
PLUG IN
HANDS-FREE
UNIT
OR OTHER
ACCESSORY
'OTHER'
JACK
'LINE'
JACK
D8W
Figure 8
Position the back (or bottom) of the
13.
voice terminal so the three terminal
mounting tabs (Figure 9) fit into the
terminal mounting slots.
14. Gently slide the voice terminal down-
ward so the three tabs fit into the
smaller part of the corresponding
mounting slots (see Figure 10).
Plug the loose end of the handset
15.
cord into the handset.
The installation is complete.
16.
THREE
VOICE TERMINAL
MOUNTING TABS
'LINE' JACK
UNIT
'OTHER'
JACK
REMOVE TO
PLUG IN
HANDS-FREE
UNIT
OR OTHER
ACCESSORY
Figure 9
Figure 10
Equipment manufactured by AT&T Technologies in the U.S.A.
TO 'LINE'
JACK
CORD
SLOT
10-BUTTON
VOICE
TERMINAL
(BACKVIEW)
Instructions For
201A 10-Button Voice
Terminal Wall Mount
(32001)
CIB 2856
ISSUE 2
©
Copyright 1984 AT&T Technologies
All rights reserved