Merlin 3070 Service And Maintenance Manual page 88

Last Number Redial and Saved Number Redial features do not work on a
Symptom:
MERLIN system operating behind a PBX.
Possible Cause
Some PBXs require a pause after the
number (for example, 9) needed to
access an outside line. The MERLIN
system cannot put in the pause when
saving a number.
Users cannot program ninth and tenth ouside lines into the Automatic Line
Symptom:
Selection feature.
Possible Cause
When in square mode, Model 1030
and 3070 do not allow the ninth and
tenth outside lines to be programmed
into the Automatic Line Selection.
TROUBLE ON SEVERAL TELEPHONES
Recommended Action
These features will not work
return dial tone immediately
number is dialed.
Recommended Action
If the telephone numbers associated with the ninth
and tenth lines must be programmed into the
Automatic Line Selection feature, switch their cords
to other line jacks at the control unit. Revise
system and user directories accordingly.
If the system has more than eight outside lines,
administering the system into pool mode is strongly
recommended. Refer to the Administration Manual:
Models 1030 and 3070 for the pros and cons of pool
mode.
Features
if the PBX does not
after the access
B5-3