Merlin 3070 Service And Maintenance Manual page 157

7. Using a (D2R or D4CH) modular line cord, connect the off-premises
line input jack on the Off-Premises Telephone Interface and the net-
work interface jack of the outside telephone line assigned to the off-
premises telephone.
NOTE: Before installing your off-premises telephone, notify your telephone
company of the following specifications for lines connecting your control
unit with your off-premises telephones:
Standard jacks (USOC RJ11C)
Facility Interface Code (FIC OL13C)
Administrator Instructions
Arrange to have the User's Guide for Off-Premises Telephones, provided
with this package, forwarded to the off-premises telephone.
If you have a feature cartridge and do not want the off-premises telephone
to ring on every line, perform the following procedure to assign specific
lines to the off-premises telephone:
1.
Plug a voice terminal into the voice terminal jack on the control unit
into which the Off-Premises Telephone Interface will be plugged.
2.
Slide the T/P (Test/Programming) switch on the left side of the voice
terminal towards you to the P position.
3.
Program the desired Automatic Line Selection. (See your system's
User's Guide.)
4.
Select and program the lines you want to have ring at the off-premises
telephone.
5. Slide the T/P switch back to the center position.
6.
Unplug the voice terminal from the voice terminal jack on the control
unit and plug the Off-Premises Telephone Interface into that same jack.
NOTE: Be sure to program Automatic Line Selection only on those lines
assigned to the off-premises telephone.
AT&T
Information Systems
Issue 2
Copyright © 1984 AT&T
Printed in U.S.A.