Merlin 3070 Service And Maintenance Manual page 57

TROUBLE ON ONE TELEPHONE
Features
Symptom:
Administrator cannot restrict outside calls at a voice terminal or basic telephone.
Possible Cause
Toll Prefix/Area Code switch
1.
(switch G on the control unit
Processor Module) may be in
wrong position.
Toll call restriction may be
2.
misadministered.
3. Telephone may be connected
to a Multipurpose Adapter.
A5-6
Recommended Action
1. Check the setting of the Toll Prefix/Area Code
switch.
Set the switch to Toll Prefix if you must dial 0
or 1 before you dial an area code.
Set the switch to Area Code if you begin with
the area code when you dial a long distance
number.
If you change the position of this switch, reset
the control unit by setting the On/Off switch on
the control unit Power Module to Off, then to
On.
2. The toll restriction may be misprogrammed.
Refer to the Administration Manual: Models
1030 and 3070 for programming instructions.
3.
See if telephones are connected to a
Multipurpose Adapter. Telephones connected
to this accessory cannot be toll call restricted.