Merlin 3070 Service And Maintenance Manual page 141

GETTING STARTED
You will need these materials:
a floor plan of your building that shows telephone
locations and cable routes between these locations
and your communications system control unit
a screwdriver
scissors
drill and bits appropriate for 3/16-inch cable.
Small cable clips are provided, but you may also want
bigger clips, cable ties, and a stapler and staples for
fastening cables.
The other materials you will need come in three oderable
kits. Examine their contents using these figures. Make sure
you have the right number of kits for your communications
system.
WIRING INSTALLATION KIT
Jack panel box
(Number required depends on
number of telephones. You will
need one jack panel box per six
telephones.)
TELEPHONE
LOCATION
3
(one per communications system)
Wiring run labels
Telephone location stickers
Blue stickers
Cable installation tool