Merlin 3070 Service And Maintenance Manual page 185

A menu of available commands can be listed by typing "help"
or "?" while in interactive mode. Among the commands
available are:
autolog
errors
10
COMMAND MENU
Enables automatic error logging mode, in
which sweeps of diagnostic tests repeat
continually without need for user intervention.
Data about any faults that occur is
accumulated in the diagnostic error table,
which may be listed via the "errors" command
in interactive mode. When the system is in
autolog mode, "AUTO" appears in the front
panel display after the "DIAG" message.
Autolog mode is disabled by the "manual"
command.
Lists the contents of the diagnostic error table.
For each fault recorded, the listing indicates:
last occurrence: the test sweep in which
the fault most recently occured.
physical slot: slot number in which the
fault occured.
module type: the type of modue found in
the suspected slot:
00
or FF
or FC
01
02
or B9
03
or F9
04
or F0
05
or F7
06
or E0
07
08
09
0A
- no module
- Diagnostics Module
- Processor Module
- Feature Module
-
Services Module
- Voice Terminal Module
-
Basic Telephone Module
-
Line Module
-
other
-
other
-
other.