Attaching Adapter Plate
1.
Turn the attendant console over.
Attach the adapter plate to the bottom of the console by sliding the adapter
2.
plate's mounting slots under the attendant console's mounting tabs (see
Figure 2). Make sure the largest opening on the adapter plate is over the
area for the "OTHER" and "LINE" jacks.
NOTE: To remove the adapter plate press the tab marked "PRESS" and,
keeping the tab pressed, slide the adapter plate down until the attendant con-
sole's mounting tabs are dislodged from the adapter plate's mounting slots.
adapter plate mounting slots
ADAPTER PLATE
attendant console mounting tabs
ATTENDANT CONSOLE
Figure 2.
Mounting Tabs and Slots