Merlin 3070 Service And Maintenance Manual page 207

MOUNTING
TABS
Get one of the new rails, turn it so that the rounded edge is up, and slided onto the
10.
back of the assembly (Figure 5).
Get the other new rail, turn it so that the square edge is up and slide onto the front
11.
of the assembly (Figure 5).
12. Install end cap on right side of ZH802A module following directions inside the end
cap (Figures 5).
FROM RAIL
MOUNTING
SLOT
Figure 4
BACK RAIL
ROUND
EDGE UP
SQUARE
EDGE UP END CAP
Figure 5
CIB 3026