Merlin 3070 Service And Maintenance Manual page 58

Attendant cannot program Intercom Auto Dial feature. This problem occurs only
when switch H on the Processor Module is set to >8. (An attendant can be
Symptom:
intercom 10 or intercoms 11 to 14 if switches B through E on the Processor
Module are set to Attendant.)
Possible Cause
In the >8 mode, an attendant must
have an Attendant Intercom Selector
to use Intercom Auto Dial.
When a call is transferred from a basic telephone, the person receiving the
Symptom: transferred call lifts the handset on the first ring but no caller is present. When the
person hangs up, the voice terminal rings again.
Possible Cause
The call was not transferred with
voice announcement.
TROUBLE ON ONE TELEPHONE
Recommended Action
Obtain an Attendant Intercom Selector. See the
Attendant's Guide: Models 1030 and 3070 for
button defaults on the Attendant Intercom Selector.
Recommended Action
Instruct users with basic telephones to transfer calls
with voice announcement. The User's Guide for
Basic Touch-Tone and Rotary Telephones provides
instructions.
Features
A5-7