Merlin 3070 Service And Maintenance Manual page 111

(10A) 5- AND 10-BUTTON VOICE TERMINAL
FIXED DESK STAND (32004)
This stand is a fixed mounting
base for the 7103, 7302, and
7303 Voice Terminals.
INSTALLATION INSTRUCTIONS
Set the handset to one side
1.
and turn the voice terminal
over.
2. Position the stand on the
back of the voice terminal
so that the stand's mount-
ing slots fit just below the
mounting tabs of the voice
terminal (see Figure 1).
3. Install the rubber feet on
the stand.
MOUNTING
SLOTS
VOICE TERMINAL
MOUNTING
TABS
10-BUTTON
VOICE TERMINAL
(BOTTOM VIEW)
Figure 1
4. Gently slide the stand up-
ward so that the slots fit
securely in the three
mounting tabs.
CIB 2854
REMOVAL INSTRUCTIONS
Turn the voice terminal
1.
over.
2. Depress the locking tab of
the 5-Button Voice Termi-
nal (see Figure 2).
Note: The 10-Button Voice
Terminal does not
have a locking tab.
LOCKING
TAB
BOTTOM VIEW
5-BUTTON
VOICE TERMINAL
Figure 2
3.
Slide the stand downward
from the voice terminal
mounting tabs.
Equipment manufactured by AT&T Technologies in the U.S.A.
STAND
Instructions For
10A 5- and 10-Button
Voice Terminal Fixed
Desk Stand (32004)
©
Copyright 1984 AT&T Technologies
All rights reserved
CIB 2854
ISSUE 3