Merlin 3070 Service And Maintenance Manual page 164

Lift the handset of your voice terminal and dial the computer access telephone number.
2.
3. When the computer answers, press the Data button on the adapter and hang up the hand-
set. The Data light should come on.
When finished, depress the Data button again to disconnect the computer. The "Data"
4.
light should go off.
Application IV: Optional Modular Telephone Equipment (Touch-Tone, or
Cordless telephones, Touch-Tone autodialers, speaker-
phones, and FAX machines)
Connect a modular cord (D4CH) from the VOICE jack on the adapter to the optional de-
1.
vice.
Press the Voice button on the adapter before using the optional device.
2.
3. When finished using the optional device, press the Data button on the adapter.
It is not possible to restrict a Touch-Tone telephone from making outside calls
NOTES:
or toll calls when it is connected to the adapter.
Rotary telephones and other telephones that output dial pulses cannot be used
to dial out when connected to the adapter. (They can only receive calls.) Num-
bers must be dialed from the voice terminal.
Equipment manufactured by AT&T Technologies in the U.S.A.
©
Copyright 1984 AT&T
All rights reserved