Merlin 3070 Service And Maintenance Manual page 248

5.
Slide the 2-Line/5-Voice Terminal Module slowly into the slot until it is
properly seated (Figure 5).
6. Close the faceplate.
7.
Install the two 7-foot line cords and the 3-1/2 foot terminal cords sup-
plied with the control unit. Arrange the cords underneath the control
unit.
8.
Reconnect the auxiliary power cord to the control unit and turn the
control unit power on.
NOTE: When you supply AC power, the red WARNING light on the control
unit should come on momentarily and then go off. The green light should
come on and stay on.
9. Reinstall the control unit door.
2-Line/5-Voice Terminal Module
Faceplate
Figure 5.
Inserting the Module
AT&T
Information Systems
Issue 1
Copyright © 1984 AT&T
Printed in the U.S.A.