Merlin 3070 Service And Maintenance Manual page 215

(Z116A) Control Unit Wall-Mounting Kit
for Models 1030 and 3070 (61360)
This wall-mounting kit provides you with the hardware you need to mount
a Model 1030 or a Model 3070 control unit on a wall. The kit contains the
following:
Two 1" x 3" wood slats
Two steel standards
Two steel shelf brackets
Two steel shelf rests
Four rubber cushions
The standards used in this
standards with four holes have the bottom two holes spaced 10 inches apart.
(The other holes are spaced 12 inches apart.) (See Figure 1.) The standards
with six holes (of which you will use only four) have those holes spaced 6
inches apart (Figure 1).
Standards Provided with Z116A Wall-Mounting Kit
CIB 3031:
kit have either four or six holes for screws. The
4-Hole
Standard
Figure 1.
Eight toggle bolts and wing nuts
Eight sheetmetal screws
Eight plastic anchor plugs
Two plastic cable ties
One ¼" masonry drill bit
6-Hole
Standard