Merlin 3070 Service And Maintenance Manual page 186

Lists the menu of available commands.
help (or ?)
manual
Disables the automatic error logging mode
(see the "autolog" command).
record
Causes the contents of the diagnostic error
table to be listed automatically at the end of
each diagnostic test sweep. The "silent"
command disables this feature.
restart
Initiates a "cold start" of diagnostics. The
content of the diagnostic error table is erased,
automatic error logging mode is disabled, and
automatic error table dumps are disabled.
Exits interactive mode and continues a
resume
diagnostic test sweep. This command is
useful if you have interrupted interactive mode
during a diagnostic test sweep and wish to
resume that sweep rather than begin a new
one.
Disables automatic listing of the diagnostic
silent
error table at the end of each test sweep (see
the "record" command).
Exits the interactive mode and performs a
sweep
single sweep of diagnostic tests on the
test segment and details: data for use of
factory service center staff.
total occurrences: the number of test
sweeps in which the fault has occurred.
display detail: detailed information about
the fault. Each message is explained in
the "Diagnostic Display Messages"
section.
11