Merlin 3070 Service And Maintenance Manual page 225

Mounting Your Attendant Console
1. Check to see that your desk stand is adjusted to the lowest position. The
support bar (see Figure 3) should be in the groove for the lowest position
(see Figure 4). If it is not in the lowest position, adjust it now by following
the instructions in the next section, "Adjusting the Desk Stand".
console mount
spring-loaded support bar
handle
low angle
support
middle angle
bar
grooves
high angle
2. Position the top of the desk stand on the bottom of the attendant console
so that the mounting tabs on the adapter plate (see Figure 5) fit into the
"A" mounting slots on the stand (see Figure 6).
Figure 3.
Desk Stand
Figure 4.
Console Mount
(Bottom View)