3.
Gently slide the stand upward so that the mounting tabs on the adapter
plate fit firmly into the smaller part of the three mounting slots on the desk
stand.
NOTE: To remove the desk stand from the console, slide the desk stand down
until the adapter plate's mounting tabs are dislodged from the desk stand's
mounting slots.
Adjusting the Desk Stand
1.
Grasp the handle on the spring-loaded support bar (see Figure 3).
Lift the console mount slightly (see Figure 3).
2.
Put the bar underneath the groove for the appropriate position (see Figure
3.
4).
Lower the console mount and let the support bar slide into the groove.
4.
adapter plate mounting tabs
Figure 5.
Attendant Console with Adapter Plate
(Bottom View)
"A" mounting slots
Figure 6.
Desk Stand Mounting Slots