Merlin 3070 Service And Maintenance Manual page 124

A B
RED
D
C
KEY
MOUNTING
PLATE
E WALL MOUNT
MOUNTING
STUDS
KEYHOLES
Figure 4
Connections
Unplug the control unit power cord
1.
from the wall outlet.
Plug the control unit power cord into
2.
the "AC Output" outlet on the auxiliary
power unit.
Insert one end of the auxiliary power
3.
cord into the jack labeled "Auxiliary
Power" on the control unit, and insert
the other end into the jack labeled
"Auxiliary Power" on the auxiliary
power unit.
4. Plug one end of the ac line cord into
the opening labeled "AC Input" on the
auxiliary power unit, and then plug the
other end into the ac wall outlet (see
Figure 5).
Figure 5
Equipment manufactured by AT&T Technologies in the U.S.A.
Instructions For
335A Auxiliary Power
Unit (3165)
CIB 2866
ISSUE 1
Copyright © 1984 AT&T Technologies
All rights reserved