(267A2) LINE BRIDGING ADAPTER (61401)
This adapter kit contains a 267A2 Adapter. The adapter connects to a single modular jack
network interface to provide two-jack access to the same line. This allows auxiliary devices
such as telephone answering machines to be connected to the line.
INSTALLATION INSTRUCTIONS
The adapter may be used in any of the following configurations:
NETWORK INTERFACE
WITH ONE (1) LINE
LINE
BRIDGING
ADAPTER
NETWORK INTERFACE
WITH TWO (2) LINES
LINE 2
LINE 1
1.
Position the adapter so that its plug matches the jack of the network interface connecting
block. Insert the adapter plug firmly. It should lock with a slight "click".
2.
The two jacks of the adapter now provide convenient connecting points for modular line
cords.
Equipment manufactured by AT&T Technologies in the U.S.A.
D4CH MODULAR LINE CORDS
TO CONTROL UNIT
TO AUXILIARY DEVICE
TWO-LINE
ADAPTER
LINE
BRIDGING
ADAPTER
D4CH MODULAR LINE CORDS
LINE 1 TO CONTROL UNIT
LINE 1 TO AUXILIARY DEVICE
LINE 2 TO CONTROL UNIT
ClB 2888