Table of Contents
Advertisement
The headset adapter makes it
possible to use a headset with
the 10- and 34-Button Voice
Terminals.
INSTALLATION INSTRUCTIONS
1. Place the adapter near the
voice terminal to which it
will be connected (see Fig-
ure 1).
10-BUTTON VOICE
TERMINAL
(BOTTOM VIEW)
'LINE'
JACK
TO CONTROL UNIT
MODULAR TERMINAL
CORD (D8W)
D8AC
CORD
'OTHER'
HEADSET
JACK
JACKS
HEADSET
ADAPTER
Figure 1
2. If your headset has a mo-
dular plug, insert it into the
smaller keyed jack on the
rear of the adapter (see
Figure 2).
HEADSET
TERMINAL
JACK
JACK
(IF MODULAR
PLUG EQUIPPED)
Figure 2
(502A) HEADSET ADAPTER (3164)
3. If your headset has a 2-
prong plug, insert it into
the headset jack on the
front of the adapter (see
Figure 3).
HEADSET
JACK
Figure 3
4.
On the rear of the adapter,
plug one end of the D8AC
Cord into the larger keyed
jack on the left of the
headset.
5.
Using the D8AC Cord sup-
plied with the adapter, con-
nect the adapter to the
"OTHER" jack on the bot-
tom of the voice terminal
(see Figure 4).
'LINE'
JACK
'OTHER'
JACK
VOICE TERMINAL
(BOTTOM VIEW)
Figure 4
CIB 2867
OPERATING INSTRUCTIONS
1.
To place a call: press the
headset adapter "ON" but-
ton and dial the number.
2.
To answer a call: press
the headset adapter "ON"
button.
To disconnect (end) a
3.
call: press the headset
adapter "OFF" button.
4.
To switch from handset to
headset: press the head-
set adapter "ON" button
and hang up the handset.
5.
To switch from headset to
handset: pick up handset
(headset will automatically
go off).
Equipment manufactured by AT&T Technologies in the U.S.A.
Advertisement
Chapters
Table of Contents
