Merlin 3070 Service And Maintenance Manual page 187

tdmp
tld
tsktbl
12
system. This command takes from
45 seconds to 3.5 minutes to complete,
depending upon the number and type of
modules present in the system.
Dumps the contents of translation memory to
the RS-232c port in S-record format for
backup of translation memory. This command
is used when a personal computer is
connected to the system to save user
programming when a Feature Module is
changed.
Enables the RS-232c port to receive data in
S-record format for placement in translation
memory. This command is used when user
programming, saved in a personal computer,
is loaded into the system again after changing
a Feature Module.
Lists the contents of the diagnostic task table,
which indicates which modules are present in
which slots and which tests will be run on
each module.