Table of Contents
Advertisement
Page 408 of 436
Connections
Connection checklist
Table 65
Connections checklist
Do you have:
A serial cable (DTE-DTE null modem cable) to connect the server to a maintenance
terminal? The IBM x3350 requires a NTRX26NPE6 9 pin female to 9 pin female null
modem cable.
An NTAK19EC cable for each CP PM or CP DC card? This cable adapts the 50-pin MDF
connector on the back of the shelf of the Media Gateway, Universal Equipment Module,
or 11C cabinet to a 25-pin DB connector.
Shielded CAT5 cables (or better) to connect the server to the ELAN and TLAN subnets?
NN43021-310
Standard 06.01
lnstalling a Signaling Server
This section contains information about server connections.
WARNING
Do not modify or use a supplied AC power cord if it is not
the correct type required for the host region.
Server cards are powered through the backplane of the Media Gateway,
Universal Equipment Module, or Media Gateway cabinet into which they
are installed and do not require a power cord.
Before connecting a Server, ensure that you have the following materials
on-hand.
March 2013
IMPORTANT!
Advertisement
Table of Contents
