Table of Contents
Advertisement
Page 70 of 436
Placing the fourth module on a column
NN43021-310
Standard 06.01
WARNING
A fully loaded module weighs approximately 60 kg
(130 lb). More than one person is required to place a
module on a column.
Procedure 2
Placing the fourth module on a column
1
Position and secure the fourth module.
a.
Locate the positioning guides on the third module (see Figure 20).
b.
Position the fourth module so it faces the same direction as the
column.
c.
Remove the front and rear module covers on the fourth module and
rear module cover on the third module.
d.
Place the fourth module on top of the column and adjust it until it is
seated securely on the positioning guides.
e.
Remove the I/O safety panel in the fourth module to gain access for
installing the center mounting bolt.
f.
Use a 14 mm (9/16 in.) socket wrench to secure the fourth module
with five mounting bolts (see Figure 21 on
March 2013
page
72).
Advertisement
Table of Contents
