Table of Contents
Advertisement
3
Remove the module that will be above the module being added:
a.
Disconnect the power connectors between the modules (review
Figure 117 on
b.
Disconnect the system monitor cable from connector J1 in the
module that will be above the module being added.
c.
Use a 14.3 mm (9/16 in.) socket wrench to remove the five mounting
bolts that secure the module and lift it off the column (see Figure 118
on
page
355).
Figure 118
Module mounting bolt
Adding a module to a column
page
353).
Mounting
bolts
Large System Installation and Commissioning
Page 355 of 436
553-3057
Advertisement
Table of Contents
