Table of Contents
Advertisement
Figure 110
Top cap assembly
Front of column
2
Remove the side panels on the exterior of each module by removing the
four bolts that secure the panel.
Note: In a two-tier or three-tier column, with adequate ceiling clearance,
you may be able to thread the rods down the sides of the column without
removing the side panels. Insert each rod into its hole at the top of the
column.
Installing earthquake bracing
Mounting bolts
Top cap
LED
Large System Installation and Commissioning
Page 337 of 436
Screw for LED bracket
on perforated panel
553-3038
Advertisement
Table of Contents
