Table of Contents
Advertisement
Page 376 of 436
cCNI slot and port assignments
NN43021-310
Standard 06.01
Cabling network modules and loops
Each system core shelf contains a minimum of one and a maximum of four
cCNI cards. Each cCNI card contains two ports to support up to two Network
groups.
cCNI cards are identified by slot and port. Each port is assigned in software
to a specific Network group. Use the System Layout Plan to determine the
connections for your system.
•
Each 3PE card has two faceplate connections: J3 and J4. Two cables are
used for each card.
•
3PE cards in Network shelves "0" are connected to the 3PE Fanout panel
in Core/Net 0.
•
3PE cards in Network shelves "1" are connected to the 3PE Fanout panel
in Core/Net 1.
Table 62 on
page 376
cCNI slot and port. These designations cannot be changed in software.
Table 62
cCNI Network group designations
cCNI
cCNI
card slot
card port
c9
c9
c10
c10
c11
c11
c12
c12
March 2013
specifies the Network group assignments for each
3PE Fanout panel label
0
N/A (factory installed directly
to the Core/Net backplane)
1
0
Port 10-0
1
Port 10-1
0
Port 11-0
1
Port 11-1
0
Port 12-0
1
Port 12-1
Port 9-1
Connected
to Network
group
0
1
2
3
4
5
6
7
Advertisement
Table of Contents
