Table of Contents
Advertisement
Page 164 of 436
NN43021-310
Standard 06.01
Configuring the system monitor
Figure 66
Cabling CS 1000M SG or Meridian 1 Option 61C, single column with
stacked Core/Net modules – cable master system monitor to SDI port
5
Daisy-chain slave system monitors to the master.
a.
For a single-column system, skip this step.
b.
For a multiple-column system, beginning with the master system
monitor, cable in series (slave 1 to slave 2, slave 2 to slave 3, and so
on) from connector J6 to connector J5 on each system monitor (see
Figure 67 on
column.
— If columns are adjacent, use an NT8D46AL cable.
— If columns are not adjacent, use an NT8D46AP cable.
March 2013
To SDI port
To next module
NT8D46AG
Backplane
CPU 0
NT8D46AA
To system monitor/
power supply assembly
in the pedestal
page
165). Terminate at connector J5 on the last
J2
J1
553-3111
Advertisement
Table of Contents
