Table of Contents
Advertisement
Page 176 of 436
NN43021-310
Standard 06.01
Connecting a system terminal or modem
Figure 69
Terminal connection diagram
During the initial installation of a dual CPU system, you may want to
temporarily install additional terminals for split mode monitoring, or
programming, or both.
Note: In a Large System, I/O ports on the Call Processing (CP) cards
can be used to monitor CPU operations. These configurations should not
be used as the permanent I/O connection for the system because the port
is only active when the associated CPU, or CP card, is active.
March 2013
Advertisement
Table of Contents
