Table of Contents
Advertisement
3
Connect the master system monitor to slave unit 1 with an NT8D46AS
cable.
4
Connect the narrow ribbon on an NT8D46AG cable from connector J2 in
the module with CPU 0 to the assigned port on the SDI card (see
Figure 65).
Figure 65
Cabling two side-by-side NTD40 shelves – system monitor to slave unit 1
and SDI port
To SDI port
NT8D46AG
cable
Backplane
CPU 0
To system monitor/
power supply assembly
in the pedestal
Configuring the system monitor
To next module
J2
J1
NT8D46AG cable
Large System Installation and Commissioning
Page 163 of 436
To next module
NT8D46AA
cable
Backplane
CPU 1
To system monitor/
power supply assembly
in the pedestal
J2
J1
553-3112
Advertisement
Table of Contents
