Table of Contents
Advertisement
a.
With a flat blade screwdriver, turn the lock clockwise on the two
locking latches (see Figure 18 on
Figure 18
Locking latches on the module cover
b.
Simultaneously push the latches toward the center of the cover and
pull the cover toward you while lifting it away from the module.
c.
Set the covers aside until the installation is complete.
3
Remove the front and rear grills from each pedestal:
a.
Loosen the two captive screws that secure the grill.
b.
Pull the grill forward and lift it out of the base of the pedestal (see
Figure 19 on
c.
Set the grills aside until the installation is complete.
Preparing for installation
Turn lock screw
up to lock
page
68).
Large System Installation and Commissioning
Page 67 of 436
page
67).
unlatch cover
Slide to
553-A0132
Advertisement
Table of Contents
