Table of Contents
Advertisement
Page 196 of 436
Reviewing required Core cards
Table 19
Required Core cards (minimum per Core/Net module)
Order
Code
Description
NT4N65
cCNI: cPCI Core Network Interface Card
NT4N48
System Utility Card
NT4N39AA
CP PIV Call Processor Card
(512 MB memory)
N0026096
MMDU replacement faceplate
Checking that the Core cards (front side) are installed
NN43021-310
Standard 06.01
Cabling Common Equipment in a Single Group system
All Core cards are installed in the factory. See Table 19 for the Core card
requirements for each Core/Net module. For module and card descriptions,
see "System equipment – UEMs" on
All Core cards are factory installed. The three Core cards (front side) are:
1
NT4N65 cPCI Core Network Interface (cCNI) card. Each system
contains one NT4N65 cCNI card per Core/Net module. The cCNI cards
are located in slot c9. If not already installed, install a P605337 cPCI
Card Slot Filler Panel to cover slots c10 to c12, which do not contain
cCNIs.
Note: In the NT4N41 Core/Net module, you must configure port 0 on
the NT4N65 Core to Network Interface (cCNI) Card in slot c9 as
Group 0. Communication between the bv cCNI and 3PE cards for
Group 0 is accomplished by using the NT4N29 cable. You require only
one cCNI card for Group 0.
Note: Slots c13 and c14 remain empty. If necessary, install a P0605337
cPCI Card Slot Filler Panel in each slot.
March 2013
page
42.
Number
required per
Core/Net module
1
1
1
1
Backplane
side
front
front
front
front
Advertisement
Table of Contents
