Avaya 1000M Installation And Commissioning Manual page 419

Communication server
Hide thumbs Also See for 1000M:
Table of Contents

Advertisement

Figure 159
Element Manager logon page
Procedure 78
Verifying the presence of an NRS
1
Open Internet Explorer.
2
Enter the ELAN or TLAN network interface IP Address of the primary
Signaling Server as the URL.
Note: Note: Do not assign the same IP address for the Node ID and the
TLAN network interface IP address. This must be verified manually. The
Node IP address must be on the same subnet as the TLAN network
interface IP addresses of the Media Cards. In addition, the TLAN and
ELAN network interfaces of the Media Card must reside on separate
logical subnets.
If additional configuration parameters were entered during installation, the
node IP address can also be used as the URL.
The Element Manager logon web page appears.
lnstalling a Signaling Server
Large System Installation and Commissioning
Page 419 of 436

Advertisement

Table of Contents
loading

Table of Contents