BOMBARDIER ELAN 3042 1985 Shop Manual page 180

Section 02 ENGINE
Sub-section 08 (532 ENGINE TYPE)
0
NOTE: The rotary valve disc is asymmetrical, there -
for e at assembly. try positioning each side of disc
on gear to determ ine best installation posi tion.
A013002029
Spray injection oil on rota ry valve before closing the rota-
ry valve cover.
30, Rotary ·valve cover bolts
The rotary valve cover bolts must be torque to
20
N•m
( 15 lbf•ft)'
02-08-20
INSPECTION
25,28, Rotary valve cover & rotary valve
A gap of 0 .27-0.48 mm (011 - 019 " ) must be mam -
tained between the rotary valve and the crankcase .
To measure this gap use a feeler gage inserted between
rotary valve and upper crankcase with the rotary valve
cover in place without it 's 0 -ring . Check the more surface
as possible . Follow the same procedure for the lower
crankcase .
A01 300202•
· · - -