BOMBARDIER ELAN 3042 1985 Shop Manual page 78

Section 02 ENGINE
Sub-section 03 (377 ENGINE TYPE)
ADJUSTMENT
Prior to adjusting the pump, make sure all carburetor
adJUStments are completed.
To synchronize pump with carburetor:
Eliminalte the throttle cable free-play by pressing the
throttle lever until a light resistance is felt, then hold in
place. The aligmng marks on the pump casting and on
the lever must align. If not, loosen the adjuster nut and
adjust accordingly .
Retighten the adjuster nut.
A001002008
02·03·20
Ma rks
tn l•ne
Bleeder
screw
To bleed oil lines:
All oil lines should be full of oil. If required, bleed the main
oil line (between tank and pump) by lqosen1ng the bleeder
screw until all air has escaped from the line.
Make sure the tank is sufficiently filled .
Check the small oil lines (between pump and intake mani-
fold) ·If required. fill the lines by running the engine at idle
speed while holding the pump leverr in fully open position.
!TYPICAL!
400100200i
Fully open
pump lever
+
WARNING: Ensure not to operate
carbureto~
throt-
tle mechanism. Secure the rear of the veh1cle on
a stand.