Fuel Line, Wiring Harness - BOMBARDIER ELAN 3042 1985 Shop Manual

.
..-...._
Section 08 FUEL LINE, WIRING HARNESS &
CABLE ROUTING
FUEL LINE, WIRING HARNESS &
CABLE ROUTING
WIRING HARNESS (ALL MODELS)
+
WARNING: Ensure all terminals are properly
crimped on the wires and that all connector hous-
ings are properly fastened. Ensure to protect them
from any rotating parts. moving parts, heating parts
and vibrating parts.
CABLE (ALL MODELS)
+
WARNING : Before installation, ensure that all
cables are in perfect condition. Properly install
the cable ends and secure them in place. Pay atten-
tion to route them properly, away from any rotating,
moving, heating or vibrating parts.
FUEL LINE CALL MODELS)
+
WARNING: Always ensure that the fuel lines are
properly fixed to the connectors. that they are
not perforated or kinked and that they are properly
routed. away from any rotating, moving, heating or
vibrating parts. Replace if perforated or deteriorated.
0
NOTE: For the fixation of the fuel lines, use as re -
quired the following spring clips:
-Impulse hose to fuel pump and eng1ne: 414 4152 00 .
- Fuel line to carburetor and fuel pump: 414 2786 00 .
08-00-1
- - -