BOMBARDIER ELAN 3042 1985 Shop Manual page 149

0
NOTE: Spare parts pistons and cylinders are Iden-
tified with a green or red dot , it 1s Important to
match the p iston with the cyl 1 nder of the same color
To minimize the effect of accele rat1on forces on circlip,
install each Clrclip so the circlip break 1s at 6 o'cl ock as
illustra te d.
Remove any burrs from piston ca used through circlip ins-
tallat ion usmg very fine emery cloth .
(
Corclip break
A00100700 2
'W'
CAUTION: Circlips must not move freely in the
T
groove after installation. If so, replace them.
2,21, Cylinders
&
pistons
Before inserting piston 1n cyl1nder. lubricate the cy linder
with new injection oil or equivalent
2.4. Cylinders & cylinder heads
At cyl1nder and/or cylinder head Installation, use PiN 420
876 171
align1ng tool (or exhaust man1foldl to ensure
sealing of intake ma nifold and exhaust (See Tools Sec -
tion) . before tightemng cyl1nder head nuts.
PIN 420 876171
lo a
0
OJ
A01700l001
Section 02 ENGINE
Sub-section 07 (503 ENGINE TYPE)
18, 19,20, Noise dampers
For proper position of noise dampers. refer to the follow-
ing illustrations.
A01700200J
Noise
dampers
02-07 -5