Modifying Epipe Service Parameters; Disabling An Epipe Service - Alcatel-Lucent 7210 SAS M Service Manual

Modifying Epipe Service Parameters

The following displays an example of adding an accounting policy to an existing SAP:
Example:config>service# epipe 2
The following output displays the SAP configuration:
ALA-1>config>service# info
----------------------------------------------
epipe 2 customer 6 vpn 2 create
----------------------------------------------
ALA-1>config>service#

Disabling an Epipe Service

You can shut down an Epipe service without deleting the service parameters.
CLI Syntax: config>service> epipe service-id
Example:config>service# epipe 2
7210 SAS M Services Guide
config>service>epipe# sap 1/1/3:21
config>service>epipe>sap# accounting-policy 14
config>service>epipe>sap# exit
description "Distributed Epipe service to east coast"
sap 1/1/3:21 create
accounting-policy 14
exit
no shutdown
exit
shutdown
config>service>epipe# shutdown
config>service>epipe# exit
Virtual Leased Line Services
Page 199