Printer Option Type W3600 (D320); Accessories - Ricoh B286 Service Manual

1. Turn off the main power switch.
2. Remove the SD card slot cover ("x1).
3. Insert the SD card that currently holds the application in Slot 3.
4. Insert the original SD card to receive the restored application in Slot 1.
! The SD card to receive the restored application can be set in Slot 2, but in this
case Slot 1 must be empty. (The application always moves to Slot 1 by default
if there are SD cards in both Slot 1 and Slot 2.)
5. Turn on the main power switch.
6. Enter the SP mode and do SP5873-2 "Undo Exec."
7. Follow the messages on the operation panel to complete the procedure.
8. Exit the SP mode.
9. Turn off the main power switch.
10. Remove both SD cards.
11. Insert the SD card with the restored application in Slot 1 or 2.
12. Turn on the main power switch.
13. Check that the application operates normally.

1.7.4 PRINTER OPTION TYPE W3600 (D320)

! The Roll Feeder (B851/B852) is required in order to use the Printer Option (D320).

Accessories

Check the accessories and their quantities against the table below.
1. SD Card: Printer
1. SD Card: TIFF/GL Filter
SM
Description
1-61
Installation of MFP Options
Qt'y
1
1
B286/B289