Ricoh B286 Service Manual page 470

SP8-xxx Data Log 2
S- to -Email
SMC
Svr
tonEnd
tonSave
TXJob
YMC
YMCK
All of the Group 8 SP's are reset with SP5 801 1 Memory All Clear,
or the counter reset SP7 808.
8001 T:Total Jobs
8002 C:Total Jobs
8004 P:Total Jobs
8005 S:Total Jobs
8006 L:Total Jobs
! These SP's reveal the number of times an application is used, not the number of pages
processed.
! When an application is opened for image input or output, this counts as one job.
Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.
!
! Only jobs executed by the operator are counted. Jobs executed by the operator
engineer using the SP modes are not counted.
! When using secure printing (when a password is required to start the print job), the job
is counted at the time when either "Delete Data" or "Specify Output" is specified.
When a copy job on the document server is printed, SP8022 also increments, and
!
when a print job stored on the document server is printed, SP8024 also increments.
B286/B289
Scan- to -E-mail
SMC report printed with SP5990. All of the Group 8 counters are
recorded in the SMC report.
Server
toner End
toner Save
Send, Transmission
Yellow, Magenta, Cyan
Yellow, Magenta, Cyan, BlacK
These SP's count the number of times each
application is used to do a job.
[0 to 9999999/ 0 / 1]
Note: The L: counter is the total number of times
the other applications are used to send a job to
the document server, plus the number of times a
file already on the document server is used.
5-200 SM