Ricoh B286 Service Manual page 296

SP1-xxx Feed
1912 Feed Motor Speed Adjustment
Adjusts the feed motor speed for the type of print medium in use (plain paper,
translucent paper, film).
Std: (70 MHz/32)/1635 = 1338 pps
For every change of "1", speed is adjusted 1/1635 or approximately 0.06%.
Example: If the setting is changed by "+10" then:
(70 MHz/32)/(1635-10) =
(70 MHz/32)/(1625) = 1346 pps
1 Plain
2 Translucent
3 Film
1916 Fusing Motor Speed Adj.
SP1916 1 to 013 adjust the basic fusing motor speed and correct the speed for
different widths of paper to prevent skew in the paper feed path. Note:
The actual adjustment that the machine applies is the sum of the width
adjustment (1916 010 to 013) and the paper type adjustment (1916 021 to 045).
10 Width:611mm more
11 Width:461-610mm
12 Width:298-460mm
13 Width:297mm less
Note: "Mode 1 to 5" below refer to the paper thickness set with [User Tools]>
"System Settings"> "Tray Paper Settings"> "Paper Thickness: Paper Tray" or
"Paper Thickness: Bypass Tray."
21 Plain:Mode1
22 Plain:Mode2
23 Plain:Mode3
B286/B289
[-100 to +100/-10/1%]
[-100 to +100/0/1%]
[-100 to +100/-10/%1]
5-26
[-100 to +100/0/1]
[-100 to +100/5/1]
[-100 to +100/9/1]
[-100 to +100/18/1]
[-100 to +100/0/1]
SM