Ricoh B286 Service Manual page 51

4. Use a wrench to adjust the nuts [1] on each foot to raise or lower the main machine at
each corner.
! The main machine must be level side-to-side within ±0.15/m.
5. Attach the left leg cover [2] and the right leg cover [3].
6. Raise the original feed unit [1].
7. Remove the protective sheet and tape [2].
8. Remove the lock screws [1], [2] (" x 2)
9. Lift the left hinge [3] and right hinge [4] off their support screws then lift the unit to the
vertical position. (Do not remove the support screws.)
10. Put the level [5] on the exposure glass.
SM
Main Machine Installation (B286)
1-15 B286/B289