Paper Feed and Registration
6.7.3 ROLL FEED MECHANISM
Drive
One roll feed motor [A] controls the two feed rollers:
The clutch [B] engages to transfer power from the motor to the feed roller [C] for Roll 1.
•
or-
The clutch [D] engages to transfer power from the motor to the feed roller [E] for Roll 2.
There is a plastic knob [F] at the end of each feed roller. After a new roll is installed, or after
a paper jam is removed, the user turns these knobs to feed the paper manually to the
cutting position.
B286/B289
6-50
SM